Mold damage claims: keeping the water you are owed apart from the mold your policy caps
I'm Volodymyr Lukaniuk, a licensed public adjuster. Owners call me when mold turns up after a leak, a burst pipe or a fire, and the insurer's answer is a short letter about an exclusion.
Most mold claims in Illinois are really two claims. One is for the water, which the policy usually pays. The other is for the growth, which the policy often limits or leaves out. My job is to read which wording you have and to keep the two apart in the estimate.
Three ways an Illinois policy treats mold, drawn against your limit
Each bar below is the money your policy can pay for one loss. The part for the water damage and the part for the mold behave differently, depending on the words in your policy and on what wet the house in the first place.
The fire and lightning rule comes from Illinois company bulletin CB 2002-07, which stays in force until the Director withdraws it. The bars show shares of one loss for illustration, not amounts.
One leak, two claims: why the Illinois court decision makes the split matter
In DeVore v. American Family, 891 N.E.2d 505 (Ill. App. 2008), a burst pipe led to mold. The policy excluded mold whatever else caused it, and the court enforced that. It also said the losses were twofold, and the water damage was covered. You can read a summary of the DeVore case on IRMI.
So when I write the estimate, every line says which side it belongs to. Drying, extraction, and the tear-out of materials that were soaked are water. Containment, air scrubbing and cleaning the growth off the framing are mold. A rebuild of the wall that the water ruined is water, even if mold was found inside it.
The water side of the claim follows the same rules as any water damage claim: sudden discharge is covered, years of slow seepage is not. If the water came from a pipe that froze, the heat records on the frozen pipe claims page go in the same file.
| # | Line | Side |
|---|---|---|
| 1 | Water extraction and drying equipment days 1 to 4 | WATER |
| 2 | Remove wet drywall to the wet line from the moisture map | WATER |
| 3 | Remove soaked carpet and pad | WATER |
| 4 | Containment and negative air for the growth area | MOLD |
| 5 | HEPA vacuum and clean framing behind the baseboard | MOLD |
| 6 | Clearance test after the cleaning | MOLD |
| 7 | New drywall, tape, paint and baseboard to the wet line | WATER |
| 8 | New carpet and pad, matched to the room | WATER |
What your insurer should tell you in the first 48 hours
The same Illinois bulletin asks insurers to try to reach you within 24 to 48 hours after you report a loss that may involve water. Keep this list by the phone and write down who called and when. I compare it with the insurer's file later.
Someone from the insurer contacted me within 24 to 48 hours of my report.
Date, nameThey told me whether my policy has a mold exclusion or a mold limit.
Date, nameThey explained how that exclusion or limit may affect this loss.
Date, nameThey told me to dry the property right away and to call a water extraction company if I needed one.
Date, name
Look for the separate notice
When an insurer adds a mold exclusion or limit to a new or renewed Illinois policy, the bulletin requires a separate, detailed written notice that explains it. I ask for the renewal packets of the last few years and check whether that notice was sent.
The drying advice has a reason. The EPA guide to mold and moisture says wet areas and items dried within 24 to 48 hours usually don't grow mold.
Records I keep from the first day of a mold claim
A mold claim is argued about two dates: when the water came, and how long it stayed. These records answer both.
The moisture map
Readings on a grid for every wet wall and floor, with the date, repeated during drying until the numbers come down.
Photos of the source
The split pipe, the failed supply line or the opening in the roof, kept with the part itself so the insurer can look at it.
The drying company's daily log
Equipment, hours and readings for each day. It shows you acted fast, which is your duty under the policy.
Sealed samples
A piece of drywall or carpet with growth, sealed in a plastic bag and labelled, in case a lab test is needed later.
The first time you saw it
A short written note: when you noticed the water, the smell, the stain or the growth. Phone photos carry their own date.
Your policy and every endorsement
The full form, the fungi endorsement and its schedule if there is one, and the renewal notices that came with them.
Water that came up through a floor drain is a different case, with its own endorsement and limit. The sewer backup claims page explains how that limit and the mold cap meet.
Show me where the water was
Photos of the wall or floor, a photo of the source if you found it, and the date you first saw the water are enough to start. If the insurer has already written to you, send that letter too.
My Illinois public adjuster license is No. 19461872, my Indiana one No. 3556317. I'm also HAAG-certified as an inspector, and you can talk to me in English, Ukrainian or Russian. More on my work is on the about page.
+1 224-481-2093 volodymyr@staterestoration.usI answer seven days a week.
What owners ask me when mold shows up after a leak
Does my homeowner policy pay for mold in Illinois?
It depends on the wording in your policy and on what caused the water. Some policies leave mold out completely, some pay it up to a small cap, and mold that follows a covered fire or lightning loss has to be covered under the Illinois Department of Insurance bulletin. I read your policy and the renewal notices to see which one you have.
The insurer denied the mold. Is the water damage still paid?
Often it is. In DeVore v. American Family, the Illinois court that upheld the mold exclusion also said the water damage from the same burst pipe was covered. So I make sure the drying, the tear-out of wet materials and the rebuild are claimed as water damage on their own lines.
Should I clean the mold myself before the adjuster comes?
Stop the water and start drying right away, because that is your duty under the policy and it keeps the damage from growing. Leave the growth itself for the remediation company, photograph it first, and keep a sealed sample of a damaged piece in a plastic bag in case it needs to be tested.
How long do I have to report it?
Report it as soon as you see it, in writing. Mold that is reported weeks after a leak gives the insurer room to argue the leak went on for a long time, which most policies exclude. The date you first saw the water and the date you first saw growth both go in my notes.
Will you tell me what the mold claim is worth?
Nobody can promise an amount before the damage is measured, and I don't. After the first visit I can show you which wording your policy has, how much of the loss sits on the water side, and what proof each line needs.